Influence of size of strengthening incoherent particles on the formation of defects structure and strength properties of dispersion-hardened alloys on the aluminum basis
Using mathematical modeling, we studied the effect of the diameter of incoherent reinforcing spherical particles in the range from nano to micro sizes on the formation and evolution of the defective structure of dispersion-hardened crystalline materials with an aluminum matrix during plastic deformation. It was revealed that the formation and accumulation in the shear zone of various types of dislocations is largely determined by the size of the strengthening particles. It has been shown that for materials containing microsize particles, the strength properties of the material decrease with increasing particle size within one volume fraction.
Keywords
дисперсно-упрочнённые материалы,
пластическая деформация,
математическое моделирование,
деформационное упрочнение,
плотность дислокаций,
dispersion-hardened materials,
plastic deformation,
mathematical model,
strain hardening,
dislocation densityAuthors
Kovalevskaya T.A. | Tomsk State University of Architecture and Building; National Research Tomsk State University | takov47@mail.ru |
Daneyko O.I. | Tomsk State University of Architecture and Building; National Research Tomsk State University | olya_dan@mail.ru |
Shalygina T.A. | Tomsk State University of Architecture and Building | kvm@tsuab.ru |
Всего: 3
References
Ковалевская Т.А., Виноградова И.В., Попов Л.Е. Математическое моделирование пластической деформации гетерофазных сплавов. - Томск.: Изд-во Том. ун-та, 1992. - 168 с.
Попов Л.Е., Кобытев В.С., Ковалевская Т.А. // Изв. вузов. Физика. - 1982. - Т. 25. - № 6. - С. 56-82.
Данейко О.И., Кулаева Н.А., Ковалевская Т.А., Колупаева С.Н. // Изв. вузов. Физика. - 2015. - Т. 58. - № 3. - С. 46-51.
Данейко О.И., Ковалевская Т.А., Матвиенко О.В. // Изв. вузов. Физика. - 2018. - Т. 61. - № 7. - С. 40-46.
Матвиенко О.В., Данейко О.И., Ковалевская Т.А. // Изв. вузов. Физика - 2018. - Т. 61. - № 8. - С. 138-145.
Matvienko O., Daneyko O., and Kovalevskaya T. // Acta Metall. Sin. (Engl. Lett.). - 2018. - V. 31. - No. 12. - P. 1297-1304.
Данейко О.И., Ковалевская Т.А., Кулаева Н.А. и др. // Изв. вузов. Физика. - 2017. - Т. 60. - № 5. - С. 69-76.
Матвиенко О.В., Данейко О.И., Ковалевская Т.А. // Изв. вузов. Физика. - 2017. - Т. 60. - № 2. - С. 35-45.
Ashby M.F. // Phil. Mag. - 1966. - V. 14. - No. 132. - P. 1157-1178.
Ebeling R. and Ashby M.F. // Phil. Mag. - 1966. - V. 13. - No. 124. - P. 805-834.
Эшби М.Ф. // Физика прочности и пластичности. - М.: Металлургия, 1972. - С. 88-108.
Hazzledine P.M. and Hirsch P.B. // Phil. Mag. - 1974. - V. 30. - No. 6. - P. 1331- 1351.
Хирш П.Б., Хэмпфри Ф.Дж. // Физика прочности и пластичности. - М.: Металлургия, 1972. - С. 158- 186.
Humphreys F.J. and Hirsch P.B. // Phil. Mag. - 1978. - V. 34. - P. 373-399.
Stewart A.T. and Martin J.W. // Acta Met. - 1975. - V. 23 - P. 1-7.
Hymphreys F.J. and Hirsch P.B. // Pros. Roy. Soc. Lond. - 1970. - V. A318. - No. 1532. - P. 73-92.
Данейко О.И., Ковалевская Т.А. // Изв. вузов. Физика. - 2018. - Т. 61. - № 9. - С. 120-127.
Матвиенко О.В., Данейко О.И., Ковалевская Т.А. // Изв. вузов. Физика - 2017. - Т. 60. - № 7. - С. 133-141.