Features of the copper-zink coating structure formation on the surface of aluminum alloys during the friction stir processing
The structure of C27400 copper alloy coating samples on the surface of aluminum alloy AA5056, which were produced by friction stir processing of the sheet package, was studied. The regularities of structure formation at deformation-initiated mixing of Al-(Cu, Zn) system components are determined. An intensive diffusion and mechanical mixing of the Al-(Cu, Zn) system components, resulting in the formation of a complex structure of the stir zone on a macro level, is revealed. It is established that during the formation of the structural-phase composition of the coating, the formation of solid solutions of aluminum in copper occurs through the displacement of zinc from the solid solution. The formation of complex solid solutions and intermetallic phases due to the diffusion of zinc into the aluminum lattice are also observed.
Keywords
фрикционная перемешивающая обработка,
полиметаллические материалы,
функционально-градиентные материалы,
медные сплавы,
алюминиевые сплавы,
покрытия,
friction stir processing,
polymetallic materials,
functionally graded materials,
copper alloys,
aluminum alloys,
coatingsAuthors
| Gusarova A.V. | Institute of Strength Physics and Materials Science of SB RAS | gusarova@ispms.ru |
| Chumaevskii A.V. | Institute of Strength Physics and Materials Science of SB RAS | ech7av@gmail.com |
| Zykova A.P. | Institute of Strength Physics and Materials Science of SB RAS | zykovaap@mail.ru |
| Gur’yanov D.A. | Institute of Strength Physics and Materials Science of SB RAS | desa-93@mail.ru |
| Kalashnikov K.N. | Institute of Strength Physics and Materials Science of SB RAS | sso.speker.asu@gmail.com |
| Kalashnikova N.A. | Institute of Strength Physics and Materials Science of SB RAS | gelombang@mail.ru |
Всего: 6
References
Ma Z.Y. // Metallurg. Mater. Trans. A. - 2008. - V. 39. - P. 642-658.
Kumar R.A., Kumar R.G.A., Ahamed K.A., et al. // Mater. Today: Proc. - 2019. - V. 16. - P. 1048-1054.
Węglowski M.S. // Archives of Civil and Mechanic. Eng. - 2018. - V. 18. - P. 114-129.
Sudhakar M., Rao C.H.S., and Saheb K.M. // Mater. Today: Proc. - 2018. - V. 5. - P. 929-935.
Li K., Liu X., and Zhao Y. // Coatings. - 2019. - V. 9. - No. 2. - P. 129.
Padhy G.K., Wu C.S., and Gao S. // J. Mater. Sci. Technol. - 2018. - V. 34. - No. 1. - P. 1-38.
Колубаев А.В., Заикина А.А., Сизова О.В. и др. // Изв. вузов. Физика. - 2017. - Т. 60. - № 12. - С. 64-70.
Tarasov S.Y., Rubtsov V.E., Kolubaev E.A., et al. // Russ. J. Nondestructive Testing. - 2015. - V. 51. - No. 9. - P. 573-579.
Елисеев А.А., Фортуна С.В., Калашникова Т.А. и др. // Изв. вузов. Физика. - 2017. - Т. 60. - № 6. - С. 91-95.
Колубаев E.A. // Изв. вузов. Физика. - 2014. - Т. 57. - № 10. - С. 22-27.
Eliseev A.A., Fortuna S.V., Kolubaev E.A., and Kalashnikova T.A. // Mater. Sci. Eng. A. - 2017. - V. 691. - P. 121-125.
Tarasov S.Y., Rubtsov V.E., Fortuna S.V., et al. // Welding in the World. - 2017. - V. 61. - No. 4. - P. 679-690.
Mishra R.S. and Ma Z.Y. // Mater. Sci. Eng. R: Reports. - 2005. - V. 50. - No. 1-2. - P. 1-78.
Mahmoud E.R.I. and Al-qozaim A.M.A. // Arab. J. Sci. Eng. - 2016. - V. 41. - P. 1757-1769.
Huang C.-W. and Aoh J.-N. // Materials. - 2018. - V. 11. - P. 599.
Azimi-Roeen G., Kashani-Bozorg S.F., Nosko M., and Švec P. // Mater. Characterizat. - 2017. - V. 127. - P. 279-287.
Wang W., Shi Q.-Y., Liu P., et al. // J. Mater. Proc. Technol. - 2009. - V. 209. - P. 2099-2103.
Kalashnikova T.A., Gusarova A.V., Chumaevskii A.V., et al. // Metal Working and Mater. Sci. - 2019. - V. 21 - No. 4. - P. 94-112.
Chumaevskii A.V., Kalashnikov K.N., and Gusarova A.V. // IOP Conf. Ser.: Mater. Sci. Eng. - 2020. - V. 753. - P. 052022.
Итин В.И., Найбороденко Ю.С. Высокотемпературный синтез интерметаллических соединений. - Томск: Изд-во Том. ун-та, 1989. - 214 с.
