Developing the method of volumetric pore distribution measuring for uranium dioxide pellets
In order to verify reliability of fuel assembly exploitation, it's necessary to know the volumetric distribution of microstructure parameters in 3D. In this paper, we propose to use standard methods of microstructure analysis with further recalculation of characteristics in 3D. This paper represents initial data requirements, algorithm of 3D-conversion, possible errors, and ways of their minimization. Results of the investigation and conversion of porosity of fuel pellets produced from different powders are presented.
Keywords
ТВЭЛ, топливные таблетки, алгоритм, пористость, TVEL (fuel element), pellets, algorithm, porosityAuthors
Name | Organization | |
Bakhteev Oleg Alexandrovich | Joint Stock Company «A.A. Bochvar High-technology Research Institute of Inorganic Materials» (Moscow) | lysikov@bochvar.ru |
Lysikov Alexandr Vladimirovich | Joint Stock Company «A.A. Bochvar High-technology Research Institute of Inorganic Materials» (Moscow) | lysikov@bochvar.ru |
Dyagterev Nikita Alexandrovich | Joint Stock Company «A.A. Bochvar High-technology Research Institute of Inorganic Materials» (Moscow) | lysikov@bochvar.ru |
Mikheev Evgeny Nikolaevich | Joint Stock Company «A.A. Bochvar High-technology Research Institute of Inorganic Materials» (Moscow) | lysikov@bochvar.ru |
References

Developing the method of volumetric pore distribution measuring for uranium dioxide pellets | Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika – Tomsk State University Journal of Mathematics and Mechanics. 2015. № 2(34).