The calculation of effective elastic constants in a composite with 3D orthogonal nonwoven fibers | Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika – Tomsk State University Journal of Mathematics and Mechanics. 2015. № 3(35).

The calculation of effective elastic constants in a composite with 3D orthogonal nonwoven fibers

The paper is devoted to the research of the effective characteristics of 3D orthogonal nonwoven fibers composites. The results were received via ANSYS software package. In this research a volume element of fibers in cubic unit cell is considered. The effective elastic properties of fiber reinforced composite have been defined by the numerical stress analysis of the unit cell.

Download file

Counter downloads: 464

Keywords

composite, fiber, effective elastic constants, numerical method, композитный, волокна, эффективные упругие постоянные, численный метод

Authors

Name	Organization	E-mail
Darya Zadeh Saeed	National Technical University "Kharkiv Polytechnic Institute" (Kharkiv, Ukraine)	s_daryazadeh@yahoo.com
Lvov Gennadii Ivanivich	National Technical University "Kharkiv Polytechnic Institute" (Kharkiv, Ukraine)	lvovgi@list.ru

Всего: 2

References

Voigt W. Uber die Beziehung zwischen den beiden Elastizitatskonstanten Isotroper Korper. Wied. Ann, 1889, vol. 38, pp. 573-587.

Reuss A. Berechnung der Fliessgrense von Mischkristallen auf Grund der Plastizitatsbedin-gung fur Einkristalle. Zeitschrift Angewandte Mathematik und Mechanik, 1929, no. 9, pp. 49-58.

Vanin G.A. Micro-Mechanics of Composite Materials. Kiev, Nauka Dumka Publ., 1985.

Halpin J.C, Kardos J.L. The Halpin-Tsai equations: A review. Polymer Engineering and Science, 1976, May, vol. 16, no. 5.

Chamis C.C. Mechanics of composite materials: past, present and future. J. Compos. Technol. Res. ASTM, 1989, no. 11, pp. 3-14.

Hashin Z., Rosen B.W. The elastic moduli of fiber reinforced materials. Journal of Applied Mechanics, Trans ASME, 1964, vol. 31, pp. 223-232.

Alfootov N.A. Calculation of laminated plates and shells made of composite materials. Moscow, Mashinostroitelni Publ., 1984.

Christensen R.M. A critical evaluation for a class of micromechanical models. Journal of Mechanics and Physics of Solids, 1990, vol. 38, no. 3, pp. 379-404.

Mori T., Tanaka K. Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Mettall., 1973, vol. 21, pp. 571-574.

Hill R. Theory of mechanical properties of fiber-strengthen materials-3. Self-consistent model. Journal of Mechanics and Physics of Solids, 1965, vol. 13. pp. 189-198.

Bubiansky B. On the elastic modulli of some heterogeneous materials. Journal of Mechanics and Physics of solids, 1965, vol. 13, pp. 223-227.

Chou Tw., Nomura S., Taya M. A self-consistent approach to the elastic stiffness of short-fiber composites. J. Compos. Mater., 1980, vol. 14, pp. 178-188.

Huang Z.M. Simulation of the mechanical properties of fibrous composites by the bridging micromechanics model. Composites: Part A, 2001, vol. 32, pp. 143-172.

Huang Z.M. Micromechanical prediction of ultimate strength of transversely isotropic fibrous composites. International Journal of Solids and Structures, 2001, vol. 38, pp. 4147-4172.

Carpeenosa D.M. Composite Materials. Kiev, Nauka Dumka Publ., 1985.

Darya zadeh S. A numerical method for determination of the effective characteristics of unidi-rectionally reinforced composites. VestnikKhPI, 2013, vol. 58, pp. 71-77.

Darya zadeh S., Lvov G.I. A numerical method for determination of the effective characteristics of unidirectionally reinforced composites with hexagonal structure. Aviation - Aerospace Technology and Technology "KhAI" 2014, no. 2(109), pp. 59-65.