The effect of external actions on a molten metal and the influence of nonmetallic nanoparticles on the structure and mechanical properties of the light alloys based on aluminum and magnesium | Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika – Tomsk State University Journal of Mathematics and Mechanics. 2020. № 64. DOI: 10.17223/19988621/64/7

The effect of external actions on a molten metal and the influence of nonmetallic nanoparticles on the structure and mechanical properties of the light alloys based on aluminum and magnesium

In this paper, the studies of the effect of aluminum and magnesium alloys' structures, which are dispersion-hardened by nanosized ceramic particles, on their mechanical characteristics are carried out. The influence of the aluminum oxide particles' concentration ranging from 0.1 to 1 wt% per grain structure on the microhardness and mechanical tensile behavior of pure aluminum is shown. It is found that with an increase in the nanosized alumina concentration from 0.1 to 1 wt% in the structure of aluminum, the tensile strength increases from 49 up to 79 MPa, and the yield strength increases from 12 up to 27 MPa in the tested samples. The impact of the dispersion of titanium diboride particles on the structure and mechanical behavior of AMg5 alloy is studied. It is revealed that the maximum grain refinement and increase in the tensile mechanical properties are observed when the titanium diboride particles of the size from 50 nm to 3 μm are used for the alloying of AMg5. The magnesium alloys ML12 hardened by 1.5 wt% particles of aluminum nitride are studied. It is found that the introduction of the aluminum nitride particles into a magnesium melt contributes to a decrease in the average grain size from ~ 1270 to 85 μm in the obtained castings and, as a result, to an increase in the mechanical properties.

Download file

Counter downloads: 142

Keywords

алюминий, магний, наноразмерные частицы, оксид алюминия, нитрид алюминия, диборид титана, структура, твердость, прочность, предел текучести, aluminum, magnesium, nanosized particles, aluminum oxide, aluminum nitride, titanium diboride, structure, hardness, tensile strength, yield strength

Authors

Name	Organization	E-mail
Vorozhtsov Aleksander B.	Tomsk State University	abv1953@mail.ru
Danilov Pavel A.	Tomsk State University	padanilov@gmail.com
Zhukov Il'ya A.	Tomsk State University	gofra930@gmail.com
Khmeleva Marina G.	Tomsk State University	khmelmg@gmail.com
Platov Vladimir V.	Tomsk State University	vova.platov.85@mail.ru
Valikhov Vladimir D.	Tomsk State University	valihov.snobls@gmail.com

Всего: 6

References

Malaki M., Xu W., Kasar A.K., Menezes P.L., Dieringa H., Varma R.S., Gupta M. Advanced metal matrix nanocomposites // Metals. 2019. V. 9. No. 3. P. 330-1-330-39.

Yin Z. Pan Q., Zhang Y., Jiang F. Effect of minor Sc and Zr on the microstructure and mechanical properties of Al-Mg based alloys // Materials Science and Engineering: A. 2000. V. 280. No. 1. P. 151-155.

Feng X. Liu H. Babu S.S. Effect of grain size refinement and precipitation reactions on strengthening in friction stir processed Al-Cu alloys // Scripta Materialia. 2011. V. 65. No. 12. P. 1057-1060.

Kendig K.L. Miracle D.B. Strengthening mechanisms of an Al-Mg-Sc-Zr alloy // Acta Materialia. 2002. V. 50. No. 16. P. 4165-4175.

De Luca A., Dunand D.C., Seidman D.N. Mechanical properties and optimization of the aging of a dilute Al-Sc-Er-Zr-Si alloy with a high Zr/Sc ratio // Acta Materialia. 2016. V. 119. P. 35-42.

Spierings A.B. Dawson K. Heeling T. Uggowitzer P.J. Schaublin R. Palm F. Wegener K. Microstructural features of Sc-and Zr-modified Al-Mg alloys processed by selective laser melting // Materials & Design. 2017. V. 115. P. 52-63.

Gao T., Ceguerra A., Breen A., Liu X., Wu Y., Ringer S. Precipitation behaviors of cubic and tetragonal Zr-rich phase in Al-(Si-) Zr alloys // Journal of Alloys and Compounds. 2016. V. 674. P. 125-130.

Valiev R.Z. Murashkin M.Y. Sabirov I. A nanostructural design to produce high-strength Al alloys with enhanced electrical conductivity // Scripta Materialia. 2014. V. 76. P. 13-16.

Москвичев Е.Н., Скрипняк В.А., Скрипняк В.В., Козулин А.А., Лычагин Д.В. Исследование структуры и механических свойств алюминиевого сплава 1560 после интенсивной пластической деформации методом прессования с рифлением // Физическая мезомеханика. 2017. Т. 20. № 4. С. 85-93.

Murashkin M.Y. Sabirov I. Kazykhanov V.U. Bobruk E.V. Dubravina A.A. Valiev R.Z. Enhanced mechanical properties and electrical conductivity in ultrafine-grained Al alloy processed via ECAP-PC // Journal of Materials Science. 2013. V. 48. No. 13. P. 4501-4509.

Krasnoveikin V.A., Kozulin A.A., Skripnyak V.A. Detection of structural changes and mechanical properties of light alloys after severe plastic deformation // Journal of Physics: Conference Series 6. "6th International Conference Current Issues of Continuum Mechanics and Celestial Mechanics, CICMCM 2016". 2017. 919. P. 012012.

Vorozhtsov S., Zhukov I., Vorozhtsov A., Zhukov A., Eskin D., Kvetinskaya A. Synthesis of micro-and nanoparticles of metal oxides and their application for reinforcement of Al-based alloys // Advances in Materials Science and Engineering. 2015. V. 2015. P. 1-6.

Vorozhtsov S., Minkov L., Dammer V., Khrustalyov A., Zhukov I., Promakhov V., Khmeleva M. Ex situ introduction and distribution of nonmetallic particles in aluminum melt: modeling and experiment // JOM. 2017. V. 69. No. 12. P. 2653-2657.

Naydenkin E., Mishin I., Khrustalyov A., Vorozhtsov S., Vorozhtsov A. Influence of combined helical and pass rolling on structure and residual porosity of an AA6082-0.2 wt% Al2O3 composite produced by casting with ultrasonic processing // Metals. 2017. V. 7. No. 12. P. 544-1-544-7.

Vorozhtsov S., Zhukov I., Promakhov V., Naydenkin E., Khrustalyov A., Vorozhtsov A. The influence of ScF3 nanoparticles on the physical and mechanical properties of new metal matrix composites based on A356 Aluminum Alloy // JOM. 2016. V. 68. No. 12. P. 3101-3106.

Vorozhtsov S., Vorozhtsov A., Kudryashova O., Zhukov I., Promakhov V. Structural and mechanical properties of aluminium-based composites processed by explosive compaction // Powder Technology. 2017. V. 313. P. 251-259.

Жуков И.А., Промахов В.В., Матвеев А.Е., Платов В.В., Хрусталев А.П., Дубкова Я.А., Ворожцов С.А., Потекаев А.И. Закономерности формирования структуры и фазового состава композиционных лигатур систем Al-Ti-BZB4C, используемых для модификации алюминиевых сплавов // Изв. вузов. Физика. 2017. Т. 60. №. 11. С. 158-163.

Zhukov I.A. Kozulin A.A., Khrustalyov A.P., Matveev A.E., Platov V.V., Vorozhtsov A.B., Zhukova T.V., Promakhov V.V. The impact of particle reinforcement with Al2O3, TiB2, and TiC and severe plastic deformation treatment on the combination of strength and electrical conductivity of pure aluminum // Metals. 2019. V. 9. No. 1. P. 65-1-65-10.

Danilov P.A., Khrustalev A.P., Vorozhtsov A.B., Zhukov I.A., Promakhov V.V., Khmeleva M.G., Pikushchak E.V., Kvetinskaya A.V. Analysis of the effect ofexternal physical fields on the casting of light alloys // Vestnik Tomskogo gosudarstvennogo universiteta // Matematika i mekhanika [Tomsk State University Journal of Mathematics and Mechanics]. 2018. V. 55. P. 84-98.

Kudryashova O.B., Eskin D.G., Khrustalev A.P., Vorozhtsov S.A. Ultrasonic effect on the penetration of the metallic melt into submicron particles and their agglomerates // Russian Journal of Non-Ferrous Metals. 2017. V. 58. No 4. P. 427-433.

Vorozhtsov S.A., Eskin D.G., Tamayo J., Vorozhtsov A.B., Promakhov V.V., Averin A.A., Khrustalyov A.P. The application of external fields to the manufacturing of novel dense composite master alloys and aluminum-based nanocomposites // Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 2015. V. 46. No. 7. P. 28702875.

Vorozhtsov S.A., Kudryashova O.B., Promakhov V.V., Dammer V.Kh., Vorozhtsov A.B. Theoretical and experimental investigations of the process of vibration treatment of liquid metals containing nanoparticles // JOM. 2016. V. 68. No 12. P. 3094-3100.

Sreekumar V.M., Hari Babu N., Eskin D.G., Fan Z. Structure-property analysis of in-situ Al-MgAl2O4 metal matrix composites synthesized using ultrasonic cavitation // Materials Science & Engineering A. 2015. V. 628. Р. 30-40.

Belov N.A. Effect of eutectic phases on the fracture behavior of high-strength castable aluminum alloys // Metal Science and Heat Treatment. 1995. V. 37. P. 237-242.