The impact of the dimension of a mathematical model of internal ballistics on design parameters of a shot for grain gunpowder charges

The problem of the impact of the mathematical model dimension on the calculated intraballistic characteristics of a shot for the charges made of granulated powder is considered. Mathematical models of the shot are studied using the spatial (axisymmetric), one-dimensional, and zero-dimensional (thermodynamic) formulations. The thermodynamic model takes into account the distribution of the pressure and velocity of a gas-powder mixture behind the shot for a channel of variable cross-section. Comparison of simulation results is carried out in a wide range of loading parameters. It is shown that there is a range of the loading parameters for a thermodynamic approach to give satisfactory approximation to the parameters obtained using the gas-dynamic approach, which describes the flow of a heterogeneous reacting mixture with a separate consideration of phases and intergranular interactions between them. Notably that in the entire range of the charging parameters studied in this work, the one-dimensional and twodimensional gas-dynamic models only slightly differ from each other. Therefore, in the main pyrodynamic period, the actuation of the charge, made of granulated powder, can be simulated using a one-dimensional gas-dynamic model or a zero-dimensional thermodynamic model with allowance for spatial distribution of the pressure and velocity of the gas-powder mixture.

Keywords

Authors

References