Statistical evaluation of mechanical characteristics of hot-pressed ceramics in ZrB2–SiC system
The effect of the addition of 5 mol.% LaB6 on the Weibull modulus of hot-pressed ceramics in ZrB2-SiC is studied in this paper. The samples with a relative density of 91-92%, a flexural strength of 300-315 MPa, and a Vickers hardness of 14-15 GPa are obtained by hot pressing at an isothermal holding temperature of 1900°C and a pressure of 30 MPa within 15 minutes in an argon atmosphere. The addition of LaB6 induces an increase in the Weibull modulus of ceramics from 9.5 up to 15.5 when calculating using the bending strength, and from 22.0 up to 31.4 when calculating using the hardness. The values calculated using the hardness are somewhat overestimated due to the local impact of the Vickers pyramid. An increase in the Weibull modulus with the addition of LaB6 is associated with increasing homogeneity of the ceramic structure due to the formation of a more developed system of interphase boundaries in three-component samples.
Keywords
ceramics,
strength,
hardness,
structure,
Weibull modulusAuthors
| Ordan’yan Sukyas S. | Saint Petersburg State Institute of Technology | |
| Nesmelov Dmitriy D. | Saint Petersburg State Institute of Technology | dnesmelov@yandex.ru |
| Novoselov Evgeniy S. | Saint Petersburg State Institute of Technology | lehmann330@gmail.com |
Всего: 3
References
Ono K. A simple estimation method of Weibull modulus and verification with strength data // Applied Sciences. 2019. V. 9 (8). Art. 1575. P. 1-39.
Danzer R., Supancic P., Pascual J., Lube T. Fracture statistics of ceramics-Weibull statistics and deviations from Weibull statistics // Engineering Fracture Mechanics. 2007. V. 74 (18). P. 2919-2932.
Lu C. A reassessment of the strength distributions of advanced ceramics // Journal of the Australian Ceramic Society. 2008. V. 44 (2). P. 38-41.
Richerson D.W., Lee W.E. Modern ceramic engineering: properties, processing, and use in design. Boca Raton: CRC press, 2018. 836 р.
Murthy D.N.P., Xie M., Jiang R. Weibull models. New York: John Wiley & Sons, 2004. 408 p.
Carlsson L.A., Adams D.F., Pipes R.B. Experimental characterization of advanced composite materials. Boca Raton: CRC press, 2014. 379 p.
Weibull W. A statistical distribution function of wide applicability // Journal of Applied Mechanics. 1951. V. 18 (3). P. 293-297.
Liu G., Meng S., An J., Sun S., Ding X. The evaluation of reliability for zirconium diboride composite with additives of graphite // International Journal of Refractory Metals and Hard Materials. 2009. V. 27 (5). P. 868-871.
Wang L., Kong D., Fang G., Liang J. High-temperature tensile strength and fracture behavior of ZrB2-SiC-graphite composite // International Journal of Applied Ceramic Technology. 2017. V. 14 (1). P. 31-38.
Makurunje P., Sigalas I., Binner J. Scale characterisation of an oxidised (Hf, Ti) C-SiC ultra-high temperature ceramic matrix composite // Journal of the European Ceramic Society. 2021. V. 41 (1). P. 167-175.
Povolny S.J., Seidel G.D., Tallon C. Numerical investigation of thermomechanical response of multiscale porous ultra-High temperature ceramics // Ceramics International. 2022. V. 48 (8). P. 11502-11517.
Grigoriev O.N., Galanov B.A., Kotenko V.A., Ivanov S.M., Koroteev A.V., Brodnikovsky N.P. Mechanical properties of ZrB2-SiC (ZrSi2) ceramics // Journal of the European Ceramic Society. 2010. V. 30 (11). P. 2173-2181.
Zou J., Liu J., Zhao J., Zhang G.J., Huang S., Qian B., Vleugels J., Van der Biest O., Shen J.Z. A top-down approach to densify ZrB2-SiC-BN composites with deeper homogeneity and improved reliability // Chemical Engineering Journal. 2014. V. 249. P. 93-101.
Grigoriev O., Neshpor I., Vedel D., Mosina T., Silvestroni L. Influence of chromium diboride on the oxidation resistance of ZrB2-MoSi2 and ZrB2-SiC ceramics // Journal of the European Ceramic Society. 2021. V. 41 (4). P. 2207-2214.
Sengupta P. et al. Effect of TiC addition on structure and properties of spark plasma sintered ZrB2-SiC-TiC ultrahigh temperature ceramic composite // Journal of Alloys and Compounds. - 2021. V. 850. Art. 156668.
Kashyap S.K., Mitra R. Microstructure and composition of multi-layered oxide scale evolved during isothermal exposure of ZrB2-SiC-LaB6 composite to air at 1500°C // Philosophical Magazine Letters. 2021. V. 101 (7). P. 265-276.
Kashyap S.K., Mitra R. Densification behavior involving creep during spark plasma sintering of ZrB2-SiC based ultra-high temperature ceramic composites // Ceramics International. 2020. V. 46 (4). P. 5028-5036.
