A study of deformation mechanisms for a two-dimensional metamaterial
This paper presents a numerical study of a two-dimensional tetrachiral metamaterial and the effect of unit cell parameters on its mechanical behavior. Finite element simulations are performed using independently varied geometric parameters of the chiral unit cell. Chiral structures can induce the compression-torsion effect and the deflection in mechanical metamaterials. The sample deflection is affected by the following factors: ring deformation, ligament deformation, and structure twisting. The highest strain estimated by the deflection of the metamaterial sample from the initial position is observed at an optimal ratio of ligament length to ring size. The effect of structural parameters on the deformation, stress distribution, and effective elastic properties of a two-dimensional metamaterial sample under uniaxial compression is studied and analyzed. For all variable parameters, a qualitatively similar nature of the equivalent stress distribution is revealed. It is found that a decrease in the volume of the main material in the metamaterial sample entails a decrease in effective Young’s modulus. The parameters accounting for the auxetic properties of the metamaterial are obtained. Effective Poisson’s ratio is determined in the range from -0.1 to 0.95.
Keywords
mechanical metamaterial,
uniaxial deformation,
chiral structure,
structure-property relationship,
finite element method,
numerical simulationAuthors
| Akhmetshin Linar R. | Tomsk State University; Institute of Strength Physics and Materials Science of Siberian Branch of Russian Academy of Sciences | akhmetshin.lr@gmail.com |
| Iokhim Kristina V. | Tomsk State University; Institute of Strength Physics and Materials Science of Siberian Branch of Russian Academy of Sciences | iokhim.k@mail.ru |
| Kazantseva Ekaterina A. | Tomsk State University; Institute of Strength Physics and Materials Science of Siberian Branch of Russian Academy of Sciences | kazantseva.ea@ispms.ru |
| Smolin Igor Yu. | Institute of Strength Physics and Materials Science of Siberian Branch of Russian Academy of Sciences; Tomsk State University | smolin@ispms.ru |
Всего: 4
References
Akhmetshin L.R., Smolin I.Yu. Influence of unit cell parameters of tetrachiral mechanical metamaterial on its effective properties // Nanoscience and Technology: An International Journal. 2020. V. 11 (3). P. 265-273.
Ахметшин Л.Р., Смолин И.Ю. Анализ некоторых методов соединения ячеек в механическом тетрахиральном метаматериале // Вестник Томского государственного университета. Математика и механика. 2022. № 77. С. 27-37.
Zheng B.-B., Zhong R.-C., Chen X., Fu M.-H., Hu L.-L. A novel metamaterial with tension-torsion coupling effect // Materials & Design. 2019. V. 171. Art. 107700.
Frenzel T., Kadic M., Wegener M. Three-dimensional mechanical metamaterials with a twist // Science. 2017. V. 358. P. 1072-1074.
Spadoni A., Ruzzene M. Elasto-static micropolar behavior of a chiral auxetic lattice // Journal of the Mechanics and Physics of Solids. 2012. V. 60. P. 156-171. 10.1016/j.jmps. 2011.09.012.
Zhong R., Fu M., Chen X., Zheng B., Hu L. A novel three-dimensional mechanical metamaterial with compression-torsion properties // Composite Structures. 2019. V. 226. Art. 111232.
Goldstein R.V., Gorodtsov V.A., Lisovenko D.S., Volkov M.A. Thin Homogeneous Two-Layered Plates of Cubic Crystals with Different Layer Orientation // Physical Mesomechanics. 2019. V. 22 (4). P. 261-268.
Goldstein R.V., Gorodtsov V.A., Lisovenko D.S., Volkov M.A. Negative Poisson's ratio for cubic crystals and nano/microtubes // Physical Mesomechanics. 2014. V. 17 (2). P. 97-115.
Zheng X., Lee H., Weisgraber T.H., Shusteff M., De Otte J., Duoss E.B., Kuntz J.D., Biener M.M., Ge Q., Jackson J.A., Kucheyev S.O., Fang N.X., Spadaccini C.M. Ultralight, ultrastiff mechanical metamaterials // Science. 2014. V. 344. P. 1373-1377.
Gold V.Compendium of chemical terminology.International Union of Pure and Applied Chemistry, 2014. V. 528.
Eidini M. Zigzag-base folded sheet cellular mechanical metamaterials // Extreme Mechanics Letters. 2016. V. 6. P. 96-102.
Prall D., Lakes R.S. Properties of a chiral honeycomb with a poisson's ratio of -1 // Interna tional Journal of Mechanical Sciences. 1997. V. 39 (3). P. 305-314.
Sangsefidi A.R., Kadkhodapour J., Anaraki A.P., Dibajian S.H., Schmauder S. Повышение эффективности сбора энергии приборами на основе метаматериалов // Физическая мезомеханика. 2022. Т. 25, № 4. С. 106-121. 10.55652/1683-805X 2022 25 4 106.
Зелепугин С.А., Толкачев В.Ф., Тырышкин И.М. Анализ эффективности противоударной стойкости двух групп керамических и композитных материалов // Вестник Томского государственного университета. Математика и механика. 2022. № 80. С. 85-96.
Колубаев Е.А., Рубцов В.Е., Чумаевский А.В., Астафурова Е.Г. Научные подходы к микро-, мезо- и макроструктурному дизайну объемных металлических и полиметаллических материалов с использованием метода электронно-лучевого аддитивного производства // Физическая мезомеханика. 2022. Т. 25, № 4. С. 5-18.
Cummer S.A., Christensen J., Alu A. Controlling sound with acoustic metamaterials // Nature Reviews Materials. 2016. V. 1. Art. 16001.
Tan T., Yan Zh., Zou H., Ma K., Liu F., Zhao L., Peng Zh., Zhang W. Renewable energy har vesting and absorbing via multi-scale metamaterial systems for Internet of things // Applied Energy. 2019. V. 254. Art. 113717.
Schaedler T., Jacobsen A., Torrents A., Sorensen A., Lian J., Greer J., Valdevit L., Carter W.B. Ultralight metallic microlattices // Science. 2011. V. 334 (6058). P. 962-965.
Akhmetshin L.R., Iokhim K., Kazantseva E., Smolin I.Yu. Response evolution of a tetrachiral metamaterial unit cell under architectural transformations // Symmetry. 2022. V. 15, is. 1. 14 р.
