Viscoplastic behaviorof ultrafme-grained alloys
Features of mechanical behavior of ultrafrne-grained (UFG) titanium and aluminum alloys under quasi-static and shock wave loading with amplitudes up to 10 GPa were studied by the numerical simulation method. To describe viscoplastic behavior of alloys, a multilevel model is offered. The model takes into account several structural factors influencing the mechanical behavior of coarse-grained and UFG alloys. The results display that the strain rate sensitivity of the yield stress of UFG and poly crystalline titanium alloys is significantly different in the range from 10 to 10s. The visco-plastic behavior of UFG FCC and HCP alloys is shown to be different at high strain rates.
Download file
Counter downloads: 329
Keywords
вязкопластическое поведение, высокоскоростная деформация, улыпрамелкозернистые сплавы, viscoplasticity, high-strain rates, ultra-fine-grained alloysAuthors
| Name | Organization | |
| Skripnyak E.G. | skrp@ftf.tsu.ru | |
| Skripnyak V.A. | skrp@ftf.tsu.ru | |
| Kozulin A.A. | kozulyn@ftftsu.ru | |
| Skripnyak V.V. | skrp@ftf.tsu.ru |
References
Meyers M.A., Mishra A., Benson D.J. Mechanical properties of nanocrystalline materials // Progress in Materials Science. 2006. V. 51. P. 427 - 556.
Meyers M.A., Vohringer O., Lubarda V.A. The onset of twinning in metals: a constitutive description//Acta Mater. 2001. V. 49. P. 4025-4039
Armstrong R.W., Zerilli F.J. Dislocation mechanics aspects on plastic instability and shear banding // Mechanics Mater. 1994. V. 17. P. 319 - 327.
Khan A.S., Suh Y.S., Kazmi R. Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys // Int. J. Plasticity. 2004. V. 20. P. 2233 - 2248.
Skripnyak V.A., Skripnyak E.G. Shear strength of nanostructured and ultra-fine grained materials in shock waves // Phys. Mesomechanics. 2004. V. 7. P. 1. P. 297 - 300.
Skripnyak V.A., Skripnyak E.G., Nazarov M.N. Mechanical behavior of nano structured materials at high strain rates. Computer simulation // Proc. 14th APS Topical Conference on Shock-Compression of Condensed Matter / ed. M.D. Furnish et al.: AIP Conf. Proc. 2006. P. 503 -506.
Фрост Г.Дж., Эшби М.Ф. Карты механизмов деформации. Челябинск: Металлургия. 1989. 328 с.
Hockauf M., Meyer L.W., Halle Т., et. al. Mechanical properties and micro structural changes of ultrafme-grained AA6963T6 during high-cycle fatigue // Int. J. Mat. Res. 2006. V. 97. P. 1392-1400.
Krüger L., Meyer L.W., Razorenov S.V., Kaneд G.I. Investigation of dynamic flow and strength properties of Ti-6-22-22S at normal and elevated temperatures // Int. J. of Impact Eng. 2003. V. 28. P. 877 - 890.
Meyer L.W., Hockauf M., Kruger L., et. al. Compressive behavior of ultrafme-grained AA6063-T6 over a wide range of strains and strain rates // Int. J. Mat. Res. 2007. V. 98. P. 1-8.
Скрипняк В.А., Скрипняк Е.Г., Крюгер Л. и др. Механическое поведение субмикрокристаллических металлических сплавов при динамических нагрузках // Экстремальные состояния вещества. Детонация. Ударные волны: Труды Междунар. конф. «IX Харитоновские тематические научные чтения». Саров: РФЯЦ ВНИИЭФ, 2007. С. 369 - 373.
Скрипняк В.А., Скрипняк Е.Г., Крюгер Л. и др. Механическое поведение субмикрокристаллических титановых сплавов при динамических нагрузках // Деформация и разрушение материалов и наноматериалов. М.: ИМЕТ РАН. 2007. С. 304 - 305.
Chichili D.R., Ramesh K.T., Hemker K.J. The high-strain-rate response of alpha-titanium: experiments, deformation mechanisms and modeling // Acta Mater. 1998. V. 46. No. 3. P. 1025 - 1043.
Harding J. The temperature and strain rate sensitivity of alpha titanium // Arch. Mechanics. 1975. V. 27. P. 715-732.
Danian C., Yuying Yu., Zhihua Y., et al. A modified Cochran - Banner spall model // Int. J. Impact Eng. 2005. V. 31. P. 1106-1118.
Капель Г.И.., Разоренов С.В., Уткин A.B., Фортов В.Е. Экспериментальные профили ударных волн в конденсированных веществах. М.: Физматлит, 2008. 246 с.
