Affect of prolonged thermal exposure on microstructure and mechanical properties of ultrafine-grained bioinert Zr - 1 wt. % Nb and Ti - 45 wt. % Nb alloys
The results for thermal stability of the microstructure and mechanical properties of ultrafine-grained alloys Zr-1 wt. % Nb and Ti-45 wt. % Nb alloys after long-term thermal annealing at temperature of 400°C are presented. It is shown that in the Zr-1 wt.%Nb alloy in the ultrafine-grained state, increase in the annealing duration from 5 to 360 hours leads to growth of the structural elements (grains, sub-grains, fragments) of the matrix phase a - Zr and the particles β-Nb. This fact is due to the processes of recrystallization. It leads to softening of the alloy and decrease of microhardness and yield stress. It was also found that annealing up to 360 hours does not affect the size of the structural elements of the matrix β-phase in the Ti-45 wt. % Nb alloy, but contributes to the noticeable growth of the α-phase and ω-phase grains. According to our results, softening of the Ti-45 wt. % Nb alloy and decrease in its mechanical characteristics are associated with the processes of return at the grain boundaries, as well as with growth of the nanoscale grains of α-phase and ω-phase and decrease in their contribution to dispersion hardening.
Keywords
mechanical properties,
phase composition,
thermal stability,
ultrafine-grained microstructure,
Zr-1 wt. % Nb and Ti-45 wt. % Nb alloysAuthors
| Eroshenko A.Yu. | Institute of Strength Physics and Materials Science of SB RAS | eroshenko@ispms.tsc.ru |
| Sharkeev Yu.P. | Institute of Strength Physics and Materials Science of SB RAS | sharkeev@ispms.tsc.ru |
| Khimich M.A. | Institute of Strength Physics and Materials Science of SB RAS | khimich@ispms.tsc.ru |
| Uvarkin P.V. | Institute of Strength Physics and Materials Science of SB RAS | uvarkin@ispms.tsc.ru |
| Tolmachev A.I. | Institute of Strength Physics and Materials Science of SB RAS | tolmach@ispms.tsc.ru |
| Glukhov I.A. | Institute of Strength Physics and Materials Science of SB RAS | gia@ispms.tsc.ru |
| Legostaeva E.V. | Institute of Strength Physics and Materials Science of SB RAS | lego@ispms.tsc.ru |
Всего: 7
References
Lai M.J., Li T., and Raabea D. // Acta Mater. - 2018. - V. 151. - P. 67-77.·
Lee C.V., Ju C.P., and Creen Lin J.H. // J. Oral Rehabitlitation. - 2002. - V. 29. - P. 314-322.
Dirras G., Tingaud D., Uedа D., et al. // Mater. Lett. - 2017. - V. 206. - No. 1. - P. 214-216.
Gleiter H. // Acta Mater. - 2000. - V. 48. - Nо. 1. - P. 1-29.
Takemoto Y., Hida M., and Sakakibara A. // J. Jpn. Inst. Met. - 1993. - No. 57. - P. 261-267.
Colings E.W. Physical Metallurgy of Titanium Alloys. Metals Park. - Ohio: American Society for Metals. Physical Description, 1984. - 261 p.
Boyer R.R. Materials Properties Handbook: Titanium Alloys. - ASM International, 1994. - 1060 p.
ASTM E1382-97(2010). Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis.
Eroshenko A.Yu., Sharkeev Yu.P., Khimich M.A., et al. // Lett. Mater. - 2020. - V. 10. - No. 1. - P. 54-59.
Eroshenko A.Yu., Mairambekova A.M., Sharkeev Yu.P., et al. // Lett. Mater. - 2017. - V. 7. - No. 4. - P. 469-472.
Ерошенко А.Ю., Шаркеев Ю.П., Глухов И.А. и др. // Изв. вузов. Физика. - 2018. - Т. 61. - № 10. - С. 136-143.
Sharkeev Yu.P., Eroshenko A.Yu., Glukhov I.A., et al. // AIP Conf. Proc. - N.Y.: AIP Publishing LLC, 2015. - V. 1683. - P. 200-206.
Bönisch M., Panigrahi A., Calin M., et al. // J. Alloys Compd. - 2017. - V. 697. - P. 300-309.
Panigrahi A., Bönisch M., Waitz T., et al. // J. Alloys Compd. - 2015. - V. 628. - P. 434-441.
Glezer A.M., Kozlov E.V., Koneva N.A., et al. Plastic Deformation of Nanostructured Materials. - Boca Raton: CRC Pess Taylor &Francic Croup, 2017. - 334 p.
Valiev R.Z., Zhilyaev A.P., and Langdon T.G. Bulk Nanostructured Materials: Fundamentals and Applications. - New Jersey: John Wiley & Sons, 2014. - 456 p.
Heltha A., Pilza S., Kirstena T., et al. // J. Mech. Behav. Biomed. Mater. - 2017. - V. 65. - P. 137- 150.
Kajima Y. and Takaichi A. // Health Care: Current Rev. - 2015. - V. 3. - No. 1. - P. 1000137-1-1000137-2.
Qizhi Chen and George A. Thouas // Mater. Sci. Eng. R. - 2015. - V. 87. - P. 1-57.
Dinu М., Franchi S., Pruna V., et al. // Titanium in Medical and Dental Applications / ed. by Francis H. Froes and Ma Qian. - Woodhead Publishing, 2018. - P. 175-200.
Niinomi M., Liu Yi, Nakai M., et al. // Regener. Biomater. - 2016. - V. 3. - No. 3. - P. 173-185.
