Influence of the energy electron beam exposure regimes on the structure and mechanical properties of composite coatings

The effect of heat treatment on the structure and properties of composite coatings based on chromium carbide with titanium carbide fabricated by non-vacuum electron beam cladding without has been studied. It was shown that tempering leads to a decrease in microhardness and wear resistance, which is associated with the decomposition of the austenitic structure with the formation of a soft ferrite-carbide structure. The post heat treatment tempering was showed to decrease of microhardness and wear resistance, which leads to the decomposition of the austenitic structure with the formation of a soft ferrite-carbide structure. The bulk quenching of coatings after tempering leads to an increase in microhardness comparable to the values of microhardness in the initial state after electron beam cladding, due to the formation of high hard martensite. The wear resistance of composite coatings after tempering is lower than after cladding due to brittle martensite, which is not able to hold solid carbide particles. The composite coatings obtained at the optimal processing conditions have a combination of improved properties and do not require additional heat treatment, resulting in structural changes, causing a decrease in mechanical properties.

Keywords

Authors

References