Synthesis of SiC-based composites by spark plasma syntering of preceramic papers
The samples of SiC and SiC f /SiC ceramic matrix composite were obtained by spark plasma sintering of preceramic paper with silicon carbide powder filler. The influence of sintering parameters - temperature, pressure, holding time - on the obtained materials phase composition, structure, and mechanical properties was studied. It was found that an increase in the pressure applied during sintering from 20 to 60 MPa reduces the porosity of the composites from 21.2 to 17.3%, respectively. A high-strength SiC f /SiC composite with the flexural strength of 430 MPa and Young's modulus of 297 GPa was obtained by sintering of preceramic paper layer-by-layer reinforced with SiC fibers at 2100 °C, 60 MPa for 3 min.
Keywords
silicon carbide, spark plasma sintering, preceramic paper, continuous fibers, flexural strengthAuthors
Name | Organization | |
Sedanova E.P. | National Research Tomsk Polytechnic University | eps4@tpu.ru |
Kashkarov E.B. | National Research Tomsk Polytechnic University | ebk@tpu.ru |
Syrtanov M.S. | National Research Tomsk Polytechnic University | mss12@tpu.ru |
Lider A.M. | National Research Tomsk Polytechnic University | lider@tpu.ru |
References

Synthesis of SiC-based composites by spark plasma syntering of preceramic papers | Izvestiya vuzov. Fizika. 2021. № 2-2. DOI: 10.17223/00213411/64/2-2/83