The influence of changes in the value of the heatinput on the structural features of ZHS6U alloy products formed by the wire-feed electron-beam additive technolog | Izvestiya vuzov. Fizika. 2021. № 8. DOI: 10.17223/00213411/64/8/31

The influence of changes in the value of the heatinput on the structural features of ZHS6U alloy products formed by the wire-feed electron-beam additive technolog

Investigated the influence of the parameters of the wire electron-beam additive process on the structure of the final product. It is shown that it is possible to obtain defect-free products with directional structure by this method. The features of the structure of the material formed by additive method and its differences from the original cast material were investigated. The influence of the heat input on the structural stability and the primary dendrite arm spacing (λ₁) has been established. It is shown that the dynamic change in the electron beam current contributes to the deceleration of the increase in the value of λ₁. The obtained values of λ₁ testify to reaching the values of temperature gradients necessary for the realization of directional crystallization.

Download file

Counter downloads: 43

Keywords

additive technologies, superalloys, microstructure, directional solidification

Authors

Name	Organization	E-mail
Gurianov D.A.	Institute of Strength Physics and Materials Science SB RAS	desa-93@mail.ru
Fortuna S.V.	Institute of Strength Physics and Materials Science SB RAS	s_fortuna@ispms.tsc.ru
Nikonov S.Yu.	Institute of Strength Physics and Materials Science SB RAS	sergrff@ngs.ru
Moskvichev E.N.	Institute of Strength Physics and Materials Science SB RAS	em_tsu@mail.ru
Kolubaev E.A.	Institute of Strength Physics and Materials Science SB RAS	eak@ispms.ru

Всего: 5

References

Fernandez-Zelaia P., Acevedo O.D., and Kirka M.M. // Metall. Mater. Trans. - 2021. - V. 52A. - P. 574-590.

Zhu L., Yang Z., Xin B., et al. // Surf. Coat. Technol. - 2021. - V. 410. - P. 126964.

Liu G., Du D., Wang K, et al. // Mater. Sci. Eng. A. - 2021. - V. 808. - P. 140911.

Бондаренко Ю.А, Ечин А.Б., Баженов В.Е., Колтыгин А.В. // Изв. вузов. Цветная металлургия. - 2017. - № 4. - С. 53-61.

Бондаренко Ю.А., Каблов Е.Н. // Металловедение и термическая обработка металлов. - 2002. - № 7. - С. 20-23.

DebRoy T., Mukherjee T., Wei H.L., et al. // Nat. Rev. Mater. - 2021. - V. 4. - P. 48-68.

Ci S., Liang J., Li J., et al. // J. Alloys Compd. - 2021. - V. 854. - P. 157180.

Tarasov S.Yu., Filippov A.V., Shamarin N.N., et al. // J. Alloys Compd. - 2019. - V. 803. - P. 364-370.

ОСТ 90126-85 Сплавы жаропрочные литейные вакуумной выплавки.

Fortuna S.V., Gurianov D.A., Kalashnikov K.N. et al. // Metall. Mater. Trans. A. - 2021. - V. 52(2). - P. 857-870.

Zhaoyang Liu and Jiayang Shu // Material. - 2020. - V. 13. - P. 2300.

ISO 857-1:2002 Welding and allied processes - Vocabulary - Part 1: Metal welding processes.

Tarasov S.Yu., Filippov A.V., Savchenko N.L., et al. // Int. J. Adv. Manuf. Technol. - 2018. - V. 99. - P. 2353-2363.

Zhang Y., Huang B., and Li J. // Metall. Mater. Trans. - 2013. - V. 44A. - P. 1641-1644.

Zhou Z., Lei Q., Yan Z., et al. // Mater. Des. - 2021. - V. 198. - P. 190296.

Калашников К.Н., Чумаевский А.В., Калашникова Т.А. и др. // Изв. вузов. Физика. - 2020. - Т. 63. - № 6. - С. 57-62.